OVER 64 YEARS IN BUSINESS  
B & A MANUFACTURING COMPANY
CARBIDE-TIPPED DRILL BITS & ACCESSORIES

CONTACT US     800-327-8611    SALES     
TREATING RODS
TRE SERIES - END OPENING
     
B & A Manufacturing Company - End Opening Treating Rods - Chemical Applicators - Accessories - Pest Control
     
TREATING RODS - END OPENING

B & A Treating Rods are designed for use by exterminators who must spray pesticides under concrete or wooden floors to eliminate termites and other unwanted pests. A hole is first drilled through the floor or wall and then either a side opening or end opening treating rod is inserted so that the end of the rod is exposed past the drilled hole into the soil below or void where the exterminator applies the pesticide. Made with a 1/4" NPT threaded coupling, B & A Treating Rods will fit any conventional hand-held pressure sprayer. For a single solid straight stream, use the end opening.

 
 

TREATING RODS - END OPENING

PART
NUMBER
SIZE OAL THREAD WT
LBS
PART
NUMBER
SIZE OAL THREAD WT
LBS
1/4" Diameter 3/8" Diameter
TRE-460 1/4" 6" 1/4" NPT 0.10 TRE-660 3/8" 6" 1/4" NPT 0.20
TRE-412 1/4" 12" 1/4" NPT 0.10 TRE-612 3/8" 12" 1/4" NPT 0.25
TRE-418 1/4" 18" 1/4" NPT 0.25 TRE-618 3/8" 18" 1/4" NPT 0.35
TRE-424 1/4" 24" 1/4" NPT 0.40 TRE-624 3/8" 24" 1/4" NPT 0.50
TRE-436 1/4" 36" 1/4" NPT 0.50 TRE-636 3/8" 36" 1/4" NPT 0.75
TRE-448 1/4" 48" 1/4" NPT 0.75 TRE-648 3/8" 48" 1/4" NPT 1.00
 
     
  Don't see what you're looking for JUST CALL 800-327-8611 AND ASK.  
     
B & A Manufacturing Company - End Opening Treating Rods - Chemical Applicators - Accessories - Pest Control
     
  TREATING RODS
END OPENING TREATING RODS