B & A Manufacturing Company provides Forged Tool and carbide tipped drill bit repair, tipping, and sharpening services.  We not only repair our own forged tools and carbide tipped drill bits, but those made by other manufacturers as well at a fraction of the cost of new ones!  So don't throw away those expensive carbide tipped drill bits, collect them up and send them to us and let us recondition them! 

PERCUSSION CORE

B&A Hammer Core Bits are designed for heavy duty rotary hammers. The special carbide tips used are intended for continuous hammering action and are combined with extra tough alloy steel bodies to give maximum performance under the most demanding use.

ROTARY CORE

Rotary Core Bits are used in standard rotary drill motors.  The Rotary Core Bit provides an extremely smooth cutting action and  a clean finished hole.  Because of the negative setting of the carbide cutting teeth, the RC Series can cut through the toughest and hardest of aggregate in any type of concrete.

REBAR CUTTER

The B & A Rebar Cutter is an easy method for drilling through embedded rebar and the surrounding concrete. The B & A Rebar Cutter can be used in a 1/2" drill motor equipped with a 3-Jawed Chuck or directly in the hammer motor utilizing the B & A Rotary Chuck Driver™ adapter. The B & A Rebar Cutter can be used in any 1/2" capacity or larger drill motor equipped with a three jaw chuck and a rated no-load speed of 400 R. P. M. to 1,200 R. P. M. This includes most combination hammer drills, but when using a combination hammer drill the selector switch must be in the rotary only position! The B & A Rebar Cutter can be used in a Spline Drive Hammer, a SDS MAX ®™ Hammer, or a SDS PLUS ®™ Hammer by utilizing the B & A Rotary Chuck Driver™.

SDS PLUS ®

The versatile Slot Drive System (SDS PLUS ®™) fits all rotary hammers that specify a SDS PLUS ®™ Shank. This positive drive slot system delivers maximum drilling torque and maximum hammer energy for faster drilling. B & A has combined the "Ultra Flute" and the SDS PLUS ®™ shank to achieve a union that makes our SR Series the fastest drilling carbide-tipped hammer bit of its type!

SDS MAX ®

The SDS MAX ®™ heavy duty slot drive system maximizes the performance of any rotary hammer that is designed for use with an SDS MAX ®™ drive system. Three positive drive slots and two ball retainer slots are incorporated into the SDS MAX ® shank design allowing a SDS MAX ®™ hammer to drill large diameter holes with ease.

SPLINE

Designed and produced for spline-drive hammers, RS Series Spline-Drive bits are held to exacting tolerances to assure perfect fit as well as maximum impact and torque transmission. B&A Spline Drive rotary/percussion bits are the best available and are designed with maximum strength in order to provide maximum life.

STRAIGHT SHANK

Round Shank hammer drill bits are designed for use in hard hitting hammer drills that utilize a 3-jawed, Jacob’s type chuck. These extra tough bits will give outstanding performance in the roughest drilling applications. The heat-treated and surface hardened alloy body, coupled with an extra tough percussion carbide tip, will stay sharper longer. The design allows for easy re-sharpening to extend the life of the bit.

PERCUSSION A & B TAPER BITS

B & A Manufacturing's Taper drill bits are made to fit our high quality adapters. The smaller "A" taper shanks are intended for bit diameters from 3/16" to 7/8". "B" taper shanks are most effective in large capacity rotary percussion hammers. They are available in sizes from 7/16" to 1-1/8" diameters. B & A Taper drill bits are made from high grade steel that is heat treated and tempered for the longest drilling life possible. The asymmetrical spiral flute, B & A’s "Ultra Flute", allows for efficient dust removal and cooler operating temperatures.

RUFFY 2000

The RUFFY 2000™ is a general purpose wood boring bit. Designed for use with hydraulic, electric, or pneumatic driven power tools. The spear point cutting tip design allows the RUFFY 2000™ to be used in applications that require a bit that is not self-feeding such as in a drill press. The 7/16" or 5/8" hex shank enables the RUFFY 2000™ to be used in power tools that have a quick change chuck or even a three-jaw chuck. The RUFFY 2000™ will out last ordinary non-carbide tipped drill bits in almost any application. The RUFFY 2000™ will drill through nail embedded wood construction without damage to the cutting tip. CCA or creosote power poles with nails or metal objects embedded in them are not a problem for the RUFFY 2000™. B & A Manufacturing Company’s carbide-tipped wood boring bits can be sharpened or completely rebuilt when necessary. B & A Manufacturing Company offers complete factory re-sharpening or rebuilding services for carbide-tipped bits.