TURF
DRILLS
|
||
|
Keeping turf in top condition over the long term requires timely and appropriate maintenance. |
||||
|
|
||||
|
What separates good Turf Drills
from Great Turf Drills? Details. Designed and manufactured for
strength, durability and long life, the B & A Turf Bits flatly out
performs other turf bits. We mill Turf Drills from a single piece of
specially formulated high strength alloy steel, with optional heat
treating for extra
toughness, and tipped with a sharpened spade shaped carbide tip. When
used, this configuration produces consistent multiple clear holes
dramatically reducing your cost per hole. Whether your job is a soccer
field, golf course, football field, parade grounds, or any turf that
is in need of aerification the B &A Turf Drill Bits with multiple fluting
styles and specialty tip configurations can be customized to match the
needs of your job! • Relieves Compaction • Improves Percolation • Thatch Removal • Efficient use of Fertilizer • for all season use on greens • toughened for the most compacted areas • Wide array of turf bits / tines to best fit your agronomic program • The best, longest-lasting aerification bits / tines available • Improve water drainage
•
does not compact the sides or the bottom of the aerification conduit
|
||||
|
|
||||
| TURF DRILL BITS are separated into 5 basic styles. | ||||
|
ROUND FLUTE |
SQUARE FLUTE |
ELLIPTICAL FLUTE |
NO FLUTE |
LEFT HANDED FLUTE |
|
Style choice and heat treatment is dependent upon physical aspects of the compacted soil:
|
||||
|
|
||||
|
TURF DRILLS -
TURF BITS - TURF DRILL BITS |
||||
| Part Number | Size | Flute Style | OAL | SHANK |
| TDN-0050-12-050 | 1/2" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDN-0625-12-050 | 5/8" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDN-0075-12-050 | 3/4" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDN-0875-12-050 | 7/8" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDN-1000-12-050 | 1" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDN-0075-12-075 | 3/4" | No Flute - Zero Flute | 12" | 3/4" Shank |
| TDN-0875-12-075 | 7/8" | No Flute - Zero Flute | 12" | 3/4" Shank |
| TDN-1000-12-075 | 1" | No Flute - Zero Flute | 12" | 3/4" Shank |
|
TURF DRILLS - TURF BITS - TURF
DRILL BITS No Flute - Zero Flute HEAT TREATED (Sold in Lots of 60) |
||||
| Part Number | Size | Flute Style | OAL | SHANK |
| TDNH-0050-12-050 | 1/2" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDNH-0625-12-050 | 5/8" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDNH-0075-12-050 | 3/4" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDNH-0875-12-050 | 7/8" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDNH-1000-12-050 | 1" | No Flute - Zero Flute | 12" | 1/2" Shank |
| TDNH-0075-12-075 | 3/4" | No Flute - Zero Flute | 12" | 3/4" Shank |
| TDNH-0875-12-075 | 7/8" | No Flute - Zero Flute | 12" | 3/4" Shank |
| TDNH-1000-12-075 | 1" | No Flute - Zero Flute | 12" | 3/4" Shank |
|
|
||||
For over 50 years we have made custom
carbide tipped drill bits, tools, and accessories for almost any
drilling application!
|
|
We are the
Largest Manufacturer of Custom Carbide Tipped Drill Bits |
|
If you don't see it,
just call us and ask! |