carbide tipped drill bits, wood, masonry, pole, auger, bit counter bore sink repair retip refurbish sharpen custom manufacture

TURF DRILLS
Turf Bits - Turf Drill Bits
TURF AERIFICATION

 carbide tipped drill bits, wood, masonry, pole, auger, bit counter bore sink repair retip refurbish sharpen custom manufacture
WOOD DRILL BITS MASONRY DRILL BITS SPECIALTY TOOLS
DRILL BIT SHARPENING CUSTOM DESIGN DRILL BIT REPAIR
ADAPTERS & ACCESSORIES INDUSTRY TOOLS DOWNLOAD CATALOG
 
TOOL CROSS REFERENCE GUIDE

Keeping turf in top condition over the long term requires timely and appropriate maintenance.

Turf Drills - Turf Bits - Turf Drill Bits - Turf Maintenance Tools - AERIFICATION - Round Flute - Square Flute - Left Hand Flute - Reverse Flute - No Flute - Zero Flute - FOOTBALL - BASEBALL - SOCCER - GOLF - PARADE
What separates good Turf Drills from Great Turf Drills? Details. Designed and manufactured for strength, durability and long life, the B & A Turf Bits flatly out performs other turf bits. We mill Turf Drills from a single piece of specially formulated high strength alloy steel, with optional heat treating for extra toughness, and tipped with a sharpened spade shaped carbide tip. When used, this configuration produces consistent multiple clear holes dramatically reducing your cost per hole. Whether your job is a soccer field, golf course, football field, parade grounds, or any turf that is in need of aerification the B &A Turf Drill Bits with multiple fluting styles and specialty tip configurations can be customized to match the needs of your job!

     • Relieves Compaction

     • Improves Percolation

     • Thatch Removal

     • Efficient use of Fertilizer

     • for all season use on greens

     • toughened for the most compacted areas

     • Wide array of turf bits / tines to best fit your agronomic program

     • The best, longest-lasting aerification bits / tines available

     • Improve water drainage

     • does not compact the sides or the bottom of the aerification conduit
     • does not compact the bottom of the hole because of the cutting action of the carbide-tip
     • leaves the sides of the aerification conduit loose to allow proper lateral drainage and
        new root development except for heavy clay soils.

Turf Drills - Turf Bits - Turf Drill Bits - Turf Maintenance Tools - AERIFICATION - Round Flute - Square Flute - Left Hand Flute - Reverse Flute - No Flute - Zero Flute - FOOTBALL - BASEBALL - SOCCER - GOLF - PARADE
TURF BITS are separated into 5 basic styles.
ROUND
FLUTE		 SQUARE
FLUTE		 ELLIPTICAL
FLUTE		 NO
FLUTE		 LEFT HANDED
FLUTE

Style choice and heat treatment is dependent upon physical aspects of the compacted soil:

  • Soil Particles - Soil Grain - Minerals - Percentages
       Sand - 0.05-2.0 mm in size
       Silt - 0.002-0.05 mm in size
       Clay - less than 0.002 mm in size

  • Soil Water
    Soil Water typically is found either as free liquid in the voids between soil particles or as thin films surrounding soil minerals.

  • Soil Air
    soil air, is composed primarily of nitrogen, carbon dioxide and oxygen

  • Organic Matter
    Organic matter is a rather diverse grouping that includes all materials that are primarily composed of carbon, hydrogen and oxygen, "living, dead, or partially decayed plant and animal substances".

  • Bulk Density
    Bulk density is defined as the dry weight of material per unit of volume.  A low bulk density indicates an abundance of voids or pore spaces while a high bulk density indicates an increased amount of minerals and a reduced amount of pore spaces.

Turf Drills - Turf Bits - Turf Drill Bits - Turf Maintenance Tools - AERIFICATION - Round Flute - TDR Series - FOOTBALL - BASEBALL - SOCCER - GOLF - PARADE
TURF DRILLS - TURF BITS - TURF DRILL BITS
ROUND FLUTE
hurricane Shutters Masonry Anchor Bits, Storm Shutters Anchor Bits, Security Shutters Masonry Anchor Bits
Turf Drills - Turf Drill Bits - Turf Bits - TDS Series - Square Flute
TURF DRILLS - TURF BITS - TURF DRILL BITS
SQUARE FLUTE

Turf Drills - Turf Drill Bits - Turf Bits - TDE Series - Elliptical Flute

TURF DRILLS - TURF BITS - TURF DRILL BITS
ELLIPTICAL FLUTE

Turf Drills - Turf Bits - Turf Drill Bits - TDL Series - Left Handed Flute - Reverse Flute - Turf Maintenance Tools - AERIFICATION - FOOTBALL - BASEBALL - SOCCER - GOLF - PARADE

TURF DRILLS - TURF BITS - TURF DRILL BITS
NO FLUTE

Turf Drills - Turf Bits - Turf Drill Bits - TDL Series - Left Handed Flute - Reverse Flute - Turf Maintenance Tools - AERIFICATION - FOOTBALL - BASEBALL - SOCCER - GOLF - PARADE

TURF DRILLS - TURF BITS - TURF DRILL BITS
LEFT HANDED FLUTE

For over 50 years we have made custom carbide tipped drill bits, tools, and accessories for almost any drilling application! 

B&A Manufacturing Company welcomes engineered drilling applications.  Our fifty plus years of experience qualifies us to design and manufacturer carbide tipped drill bits and specialty products for almost any drilling application.  We have the capacity to manufacture carbide tipped drill bits that are considered nonstandard by other manufacturers.

We can and will design a carbide tipped drill bit or specialty tool that will do your job at a reasonable cost. If your job calls for a special drill bit, give us a call at (800) 327-8611 or email us at drills@bamanufacturing.com   We can work from your drawings or design it for you.