2011
....YOU'LL NEED A HOLE IN IT!
CONTACT US
800-327-8611
drills@bamanufacturing.com
SALES
Click Here
INDUSTRIAL
TRADES
INDEX
REBAR CUTTER
ROTARY ONLY - CARBIDE TIPPED DRILL BITS
REBAR CUTTER
The B & A Rebar Cutter is an easy method for drilling through embedded rebar and the surrounding concrete. The B & A Rebar Cutter can be used in a 1/2" drill motor equipped with a 3-Jawed Chuck or directly in the hammer motor utilizing the B & A Rotary Chuck Driver adapter. The B & A Rebar Cutter can be used in any 1/2" capacity or larger drill motor equipped with a three jaw chuck and a rated no-load speed of 400 R. P. M. to 1,200 R. P. M. This includes most combination hammer drills, but when using a combination hammer drill the selector switch must be in the rotary only position! The B & A Rebar Cutter can be used in a Spline Drive Hammer, a SDS MAX ฎ Hammer, or a SDS PLUS ฎ Hammer by utilizing the B & A Rotary Chuck Driver.
98% OF CARBIDE TIPPED MASONRY DRILL BIT FAILURE
|
|
DAMAGE |
|
DAMAGE |
|
IS CAUSED BY STRIKING REBAR!
|
HOW TO USE A REBAR CUTTER |
|||||
|
STEP 1 |
STEP 2 |
STEP 3 |
|||
| When drilling with a rotary hammer and a carbide tipped hammer bit, the tools must be quickly stopped when the bit tip comes in contact with steel reinforcing bar or wire mesh. If the tool is not stopped any carbide tipped hammer bit will fail. |
|
Using a standard 1/2" chuck capacity rotary drill with the rebar cutter inserted into the chuck, place the rebar cutter into the hole and drill through the embedded rebar or wire by maintaining an even and constant pressure. |
|
After drilling through the rebar or wire, remove the debris from the hole and continue drilling with the rotary hammer and carbide tipped bit. |
|
|
ROTARY REBAR CUTTER - RB SERIES - SPECIALTY PRODUCT |
|||||||||
|
PART |
SIZE | OAL | SHANK |
WT LBS |
PART |
SIZE | OAL | SHANK |
WT LBS |
|
ROUND SHANK |
SDS PLUS ฎ SHANK |
||||||||
|
ONE PIECE |
|||||||||
| RB-80 | 3/8" | 12" | 1/2" | 0.60 | RBSR-80 | 3/8" | 12" | SDS | 0.60 |
| RB-90 | 1/2" | 12" | 1/2" | 0.70 | RBSR-90 | 1/2" | 12" | SDS | 0.70 |
| RB-90-18 | 1/2" | 18" | 1/2" | 0.70 | RBSR-90-18 | 1/2" | 18" | SDS | 0.70 |
| RB-95 | 9/16" | 12" | 1/2" | 0.85 | RBSR-95 | 9/16" | 12" | SDS | 0.85 |
| RB-100 | 5/8" | 12" | 1/2" | 1.00 | RBSR-100 | 5/8" | 12" | SDS | 1.00 |
| RB-100-18 | 5/8" | 18" | 1/2" | 1.00 | RBSR-100-18 | 5/8" | 18" | SDS | 1.00 |
| RB-101 | 11/16" | 12" | 1/2" | 1.15 | RBSR-101 | 11/16" | 12" | SDS | 1.15 |
| RB-102 | 3/4" | 12" | 1/2" | 1.30 | RBSR-102 | 3/4" | 12" | SDS | 1.30 |
| RB-102-18 | 3/4" | 18" | 1/2" | 1.30 | RBSR-102-18 | 3/4" | 18" | SDS | 1.30 |
| RB-102-24 | 3/4" | 24" | 1/2" | 1.30 | RBSR-102-24 | 3/4" | 24" | SDS | 1.30 |
| RB-1316 | 13/16" | 12" | 1/2" | 1.30 | RBSR-1316 | 13/16" | 12" | SDS | 1.30 |
| RB-103 | 7/8" | 12" | 1/2" | 1.75 | RBSR-103 | 7/8" | 12" | SDS | 1.75 |
| RB-104 | 1" | 12" | 1/2" | 2.35 | RBSR-104 | 1" | 12" | SDS | 2.35 |
| RB-105 | 1-1/8" | 12" | 1/2" | 2.60 | RBSR-105 | 1-1/8" | 12" | SDS | 2.60 |
| RB-106 | 1-1/4" | 12" | 1/2" | 3.15 | RBSR-106 | 1-1/4" | 12" | SDS | 3.15 |
| TWO PIECE | |||||||||
| RB-107 | 1-3/8" | 12" | 1/2" | 3.75 | RBSR-107 | 1-3/8" | 12" | 1/2" | 3.75 |
| RB-108 | 1-1/2" | 12" | 1/2" | 4.20 | RBSR-108 | 1-1/2" | 12" | 1/2" | 4.20 |
| RB-110 | 1-3/4" | 12" | 1/2" | 4.65 | RBSR-110 | 1-3/4" | 12" | 1/2" | 4.65 |
| RB-112 | 2" | 12" | 1/2" | 5.10 | RBSR-112 | 2" | 12" | 1/2" | 5.10 |
| RB-115 | 2-1/2" | 12" | 1/2" | 5.40 | RBSR-115 | 2-1/2" | 12" | 1/2" | 5.40 |
| RB-117 | 3" | 12" | 1/2" | 6.90 | RBSR-117 | 3" | 12" | 1/2" | 6.90 |
| SHANKS - REBAR CUTTER | |||||||||
|
PART NUMBER |
THREAD | OAL | SHANK |
WT LBS |
PART NUMBER |
THREAD | OAL | SHANK |
WT LBS |
| RBS-6 | 3/4"-10 | 6" | 1/2" | 0.65 | RBS-12 | 3/4"-10 | 12" | 1/2" | 0.70 |
Don't see what you're looking for JUST CALL 800-327-8611 AND ASK.
REBAR CUTTER
ROTARY ONLY - CARBIDE TIPPED DRILL BITS