B & A MANUFACTURING COMPANY
3665 EAST INDUSTRIAL WAY
WEST PALM BEACH, FL 33404
800-327-8611 / 561-848-8648 / (fax)561-848-8621
drills@bamanufacturing.com

PRODUCT
INDEX

An American company producing the highest quality
drill bits and accessories since 1947

Click Here
INDUSTRIAL
TRADES

< Previous Page IT_08  
INDUSTRIAL TRADES APPLICATIONS
STORM SHUTTERS
HURRICANE PANELS
Carbide Tipped Masonry Drill Bits - Hurricane Shutter Bits - Hurricane Anchor Drills - Hurricane Anchor Bits - Storm Shutters Security Shutters - Hurricane Protection - Masonry Anchor Bits - hurricane panel - hurricane panel anchors - hurricane shutter anchors - hurricane shutters

IT - PAGE 8

HURRICANE
hurricane Shutters Masonry Anchor Bits, Storm Shutters Anchor Bits, Security Shutters Masonry Anchor Bits combination bit cd-14 hurricane hugo

HUGO
HURRICANE

ANDREW
HURRICANE
hurricane panel storm shutter installation tools

KATRINA
Installation Of Machine Screw Anchors
1

   Premark your holes.

2 CD-14 Combination Drill Bit - Hurricane Panel Installation  B & A Manufacturing Company - Combination Drill Bits - Carbide Tipped Drill Bits - Masonry Drill Bits -standard masonry drill bits - rotayr drill bits - carbide tipped drill bits - concrete drill bits - Masonry Expansion Anchor installation bits - hurricane panel bits

Using the ½" Combination Drill Bit (CD-14), drill a hole deep enough to insert the 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole.

3 B & A Manufacturing Company - Combination Drill Bits - Carbide Tipped Drill Bits - Masonry Drill Bits -standard masonry drill bits - rotayr drill bits - carbide tipped drill bits - concrete drill bits - Masonry Expansion Anchor installation bits - hurricane panel bits

Insert the ¼-20 Machine Screw Anchor with the Brass portion entering the concrete first.

4 B & A Manufacturing Company - Combination Drill Bits - Carbide Tipped Drill Bits - Masonry Drill Bits -standard masonry drill bits - rotayr drill bits - carbide tipped drill bits - concrete drill bits - Masonry Expansion Anchor installation bits - hurricane panel bits

Insert the ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lead portion expands over the brass portion of the Anchor. Your Anchor is now ready for use with the ¼-20 Bolt.

5 CD-14 Anchor Installation

Position your panel or wood over the Anchor and affix it with the ¼-20 Bolt.

Installation Of ¼-20 Brass Wood Bushings

1. Premark your holes.
2.

Using the 3/8" Wood Spade Drill Bit, drill a hole deep enough to insert the ¼-20 Brass Wood Bushing into the wood. Blow out any excess dust in the hole.

3.  

Insert the ¼-20 Brass Wood Bushing with the un-slotted portion into the hole first.

4.   Using a slotted screw driver, screw the Brass Wood Bushing into the hole until it is fully embedded in the wood.
5.  

Position your panel over the Brass Wood Bushing Anchor and affix it with the ¼-20 Bolt.

Installation Of The Brass Machine Screw Anchors
With The Use Of The ½ X ¼ Combination Drill Bit

1.
Premark your holes.
2. CD-14 Combination Drill Bit - Hurricane Panel Installation B & A Manufacturing Company - Combination Drill Bits - Carbide Tipped Drill Bits - Masonry Drill Bits -standard masonry drill bits - rotayr drill bits - carbide tipped drill bits - concrete drill bits - Masonry Expansion Anchor installation bits - hurricane panel bits Using the Combination Drill Bit (CD-14), drill a hole deep enough to set the ¼-20 Brass Machine Screw Anchor into the concrete or concrete block. Should you need to charge the depth of your hole, use the enclosed Hex Key to loosen the collar on the bit. Once the collar is loosened, you may adjust the length or the ¼" Pilot Bit. You can obtain a deeper ½" hole by reversing the collar on the bit. The hole must be deep enough to fully set the anchor into the concrete or concrete block. Blow out any excess concrete dust.
3. B & A Manufacturing Company - Combination Drill Bits - Carbide Tipped Drill Bits - Masonry Drill Bits -standard masonry drill bits - rotayr drill bits - carbide tipped drill bits - concrete drill bits - Masonry Expansion Anchor installation bits - hurricane panel bits Insert the Brass Machine Screw Anchor with the Brass portion entering the concrete first.
4. B & A Manufacturing Company - Combination Drill Bits - Carbide Tipped Drill Bits - Masonry Drill Bits -standard masonry drill bits - rotayr drill bits - carbide tipped drill bits - concrete drill bits - Masonry Expansion Anchor installation bits - hurricane panel bits Insert the ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lead portion expands over the brass portion of the Anchor. Your Anchor is now ready for use with the ¼-20 Bolt.
5. CD-14 Anchor Installation

Position your panel over the Brass Machine Screw Anchor and affix it with the ¼-20 Bolt.

B&A Manufacturing Company’s dedication to research and development has produced many fine products, such as our line of PENETRATOR and ELIMINATOR wood boring bits. Research and development is an everyday part of our operation. In fact, we can produce one piece drill bits in lengths and diameters that other manufacturers simply cannot match.

Our motto is, "If you have a drilling problem, Chances are we can help you solve it!"

< Previous Page IT_08