2014

SOONER OR LATER,
....YOU'LL NEED A
HOLE IN IT!

CONTACT US
800-327-8611
drills@bamanufacturing.com
SALES

Click Here
PRODUCT
INDEX

Over 64 years in business

Click Here
CATALOG
Download

     

TREATING RODS
SIDE OPENING TREATING RODS

     
< Previous B & A Manufacturing Company - End Opening Treating Rods - Chemical Applicators - Accessories - Pest Control Next  >
     
TREATING RODS - SIDE OPENING

B & A Treating Rods are designed for use by exterminators who must spray pesticides under concrete or wooden floors to eliminate termites and other unwanted pests. A hole is first drilled through the floor or wall and then either a side opening or end opening treating rod is inserted so that the end of the rod is exposed past the drilled hole into the soil below or void where the exterminator applies the pesticide. Made with a 1/4" NPT threaded coupling, B & A Treating Rods will fit any conventional hand-held pressure sprayer. For a single solid straight stream, use the end opening.

 
 

TREATING RODS - SIDE OPENING

PART
NUMBER
SIZE OAL THREAD WT
LBS
PART
NUMBER
SIZE OAL THREAD WT
LBS
1/4" Diameter 3/8" Diameter
TR-160 1/4" 6" 1/4" NPT 0.10 TR-360 3/8" 6" 1/4" NPT 0.20
TR-112 1/4" 12" 1/4" NPT 0.10 TR-312 3/8" 12" 1/4" NPT 0.25
TR-118 1/4" 18" 1/4" NPT 0.25 TR-318 3/8" 18" 1/4" NPT 0.35
TR-124 1/4" 24" 1/4" NPT 0.40 TR-324 3/8" 24" 1/4" NPT 0.50
TR-136 1/4" 36" 1/4" NPT 0.50 TR-336 3/8" 36" 1/4" NPT 0.75
TR-148 1/4" 48" 1/4" NPT 0.75 TR-348 3/8" 48" 1/4" NPT 1.00
 
     
  Don't see what you're looking for JUST CALL 800-327-8611 AND ASK.  
     
< Previous B & A Manufacturing Company - End Opening Treating Rods - Chemical Applicators - Accessories - Pest Control Next  >
     
  TREATING RODS
SIDE OPENING TREATING RODS