forged tools - hammer iron - sds plus - flat chisel - scaling chisel - bull point - moil - carbide tipped drill bits, wood, masonry, pole, auger, bit counter bore sink repair retip refurbish sharpen custom manufacture

FORGED TOOLS
HAMMER IRON
 SDS Plus ®

forged tools - hammer iron - sds plus - flat chisel - scaling chisel - bull point - moil - carbide tipped drill bits, wood, masonry, pole, auger, bit counter bore sink repair retip refurbish sharpen custom manufacture

FORGED TOOLS BY DRIVE SHANK

FORGED TOOLS BY TOOL TYPE

FORGED TOOLS

Forged Tools
 BULL POINTS or MOIL POINTS
are used for general-purpose demolition in brick or concrete.

forged tools - hammer iron - sds plus - moil - bull point - carbide tipped drill bits, wood, masonry, pole, auger, bit counter bore sink repair retip refurbish sharpen custom manufacture

Bull Point / Moil

10" OAL

HM-5005

FORGED TOOLS

Forged Tools
 FLAT  CHISELS & SCALING CHISELS
are used to remove weld spatter, scaling, or to clean concrete forms after use.
forged tools - hammer iron - sds plus - flat chisel - carbide tipped drill bits, wood, masonry, pole, auger, bit counter bore sink repair retip refurbish sharpen custom manufacture
Flat Chisel
3/4"x10"
HM-5001

FORGED TOOLS
forged tools - hammer iron - sds plus - scaling chisel - carbide tipped drill bits, wood, masonry, pole, auger, bit counter bore sink repair retip refurbish sharpen custom manufacture
 Scaling Chisel
1-1/2"x10"
HM-5008

B&A Manufacturing Company welcomes engineered drilling applications.  Our fifty plus years of experience qualifies us to design and manufacturer carbide tipped drill bits and specialty products for almost any drilling application.  We have the capacity to manufacture carbide tipped drill bits that are considered nonstandard by other manufacturers.

We can and will design a carbide tipped drill bit or specialty tool that will do your job at a reasonable cost. If your job calls for a special drill bit, give us a call at (800) 327-8611 or email us at drills@bamanufacturing.com   We can work from your drawings or design it for you.

B & A Manufacturing Company provides complete carbide tipped drill bit repair, tipping, and sharpening services.  We not only repair our own carbide tipped drill bits, but those made by other manufacturers as well at a fraction of the cost of new ones!  So don't throw away those expensive carbide tipped drill bits, collect them up and send them to us and let us recondition them!  For a complete list of carbide tipped drill bits we repair please click here.

We are the Largest Manufacturer of Custom Carbide Tipped Drill Bits
Hard to Find - Specialty Drill Bits - Wood - Timber - Concrete - Masonry - Stone Metal - Fiber Glass - Composites - Rail Road - Pole - Utility - Plastic - Under Water Marine - Sand Mold Bits - Rock - Stone

If you don't see it,  just call us and ask!
800-327-8611 or Email us at drills@bamanufacturing.com