|
||||||||||||
| WOOD DRILL BITS |
B&A's Carbide Tipped Bell Hanger Drill Bits or Installer Bits are used in small wire installation or fishing wire threw holes that have just been drilled. These installer bits are carbide tipped. The Bell Hanger Drill Bits are specifically designed for small wire installation applications such as telephone wire installation, security alarm installation, fire alarm installation, cable wire installation, data network wire installation, electricians and other professionals. All use these unique carbide tipped installer bits to drill holes through walls, studs and other obstacles and then use the unique threw hole, attaches a wire to the installer bit and fishes the small wire back through the drilled hole with ease. |
|---|---|
| MASONRY DRILL BITS | |
| SPECIALTY TOOLS | |
| INDUSTRY TOOLS | |
| CUSTOM DESIGN | |
| ADAPTERS | |
| ACCESSORIES | |
| HAMMER IRON | |
| DRILL BIT SHARPENING | |
| DRILL BIT REPAIR | |
| DOWNLOAD CATALOG | |
| CROSS REFERENCE |
BELL HANGER
DRILL BITS
|
|||||||||||||
 |
|||||||||||||
 |
|||||||||||||
| Size |
Shank |
OAL |
Part |
Size |
Shank |
OAL |
Part |
||||||
|
1/4" Dia. Bell Hanger (Bellhanger) Bits |
3/8" Dia Bell Hanger (Bellhanger) Bits | ||||||||||||
|
1/4" |
1/4" |
12" | BH-1412 |
3/8" |
3/8" |
12" |
BH-3812 | ||||||
|
1/4" |
1/4" |
18" | BH-1418 |
3/8" |
3/8" | 18" | BH-3818 | ||||||
|
1/4" |
1/4" |
24" | BH-1424 |
3/8" |
3/8" | 24" | BH-3824 | ||||||
|
1/4" |
1/4" |
36" | BH-1436 |
3/8" |
3/8" | 36" | BH-3836 | ||||||
|
1/4" |
1/4" |
48" | BH-1448 |
3/8" |
3/8" | 48" | BH-3848 | ||||||
| 5/16" Dia Bell Hanger (Bellhanger) Bits | 1/2" Dia Bell Hanger (Bellhanger) Bits | ||||||||||||
|
5/16" |
5/16" |
12" |
BH-51612 | 1/2" | 3/8" | 12" | BH-1212 | ||||||
|
5/16" |
5/16" |
18" |
BH-51618 |
1/2" |
3/8" | 18" | BH-1218 | ||||||
|
5/16" |
5/16" |
24" |
BH-51624 | 1/2" | 3/8" | 24" | BH-1224 | ||||||
|
5/16" |
5/16" |
36" |
BH-51636 | 1/2" | 3/8" | 36" | BH-1236 | ||||||
|
5/16" |
5/16" |
48" |
BH-51648 | 1/2" | 3/8" | 48" | BH-1248 | ||||||
|
|||||||||||||
|
NEW PRODUCTS |
|||||||||||||
|
NEW ITEMS |
NEW |
NEW |
|||||||||||
| NEW ITEMS |
NEW FIBERGLASS POLE BITS HOLLOW CORE POLES |
NEW |
NEW |
||||||||||
| NEW ITEMS |
NEW Yankee Push Drill ADAPTERS |
NEW Vibrating Hammer Tile Bits |
NEW Earth Augers |
||||||||||
|
For over fifty years now, B&A Manufacturing Company has been an industry leader in the design, production, and marketing of carbide tipped drill bits and accessory items. The name B&A, means the same as it did when our company was founded, B&A The Best Available. Our basic business principles of high quality, and our dedication to customer service, assure you of the Best Product and Best Service available anywhere. B&A Manufacturing Companys dedication to research and development has produced many fine products, such as our line of Hurricane Shutter Installer Bits, Railroad Masonry Counter bores, and carbide tipped Bellhanger. Research and development is an everyday part of our operation. In fact, we can produce one piece carbide tipped drill bits in lengths and diameters that other manufacturers simply cannot match. Our motto is, If you have a drilling problem, chances are we can help you solve it! We became involved in designing wood boring bits over 15 years ago when we were approached by the utility and railroad industries. They had special needs and requirements, and nowhere to turn. Now, our Railroad Tied Bits, Railroad Counter Bores and FIREBALL wood boring carbide tipped drill bits are widely specified throughout their industry! The Log Home Industry has approached B&A Manufacturing Company to solve its drilling problems. Many drilling applications are unique to this industry only. Yours is a tough job, and you needed a tough drill bit. B&A Manufacturing Company has responded! Weve listened, and after months of testing and refining, we developed carbide tipped drill bits for boring long, large diameter holes that make all other drill bits in your tool shed obsolete! Milled out of a single piece of metal, with a custom designed lead screws and a specially modified carbide cutting tips, youll have no doubt that our wood boring carbide tipped drill bits are designed for the serious wood craftsman! Contributing to the lower cost-per-hole design of our carbide tipped wood boring drill bits can be re-sharpened, or even completely rebuilt if necessary. This gives our carbide tipped wood boring drill bits the ability to outlast ordinary steel wood boring bits one hundred times to one, under normal conditions, dramatically cutting your yearly drill bit expense! No more worrying about spot-welded fluting coming loose half way through a hole, stopping your job dead in its tracks! No more wasted time or money having a longer shank welded onto your present bit in order to do a job! B & A carbide tipped wood boring drill bits come in standard sizes up to four feet in length, with even larger sizes available on special orders! No more time wasted clearing your holes because the fluting on your present bits isnt long enough for the holes youre drilling. The four-foot carbide tipped wood drill bits comes with a standard 44" of fluting, in diameters of up to 1 พ". Need a longer bit? Give us a call! Our custom designed lead screw pulls the carbide tipped wood drill bits more quickly through the wood, while drilling a truer hole than your present drill bits do! You will be dealing with one of the most respected manufacturers of carbide-tipped drill bits in the industry. Weve been in business for over 50 years, which means we know a thing or two about drilling holes. Many of you have been in the Log Home business for many years. We wouldnt dream of telling you how to do your job. But, if you happen to run across a drilling problem, give us a call! Theres a good chance we can help, and youll find us real friendly too! |
|||||||||||||
