|
2011 |
SOONER OR LATER,
....YOU'LL NEED A HOLE IN IT!
Over 64 years in business
|
CONTACT US |
|
Click Here |
Click Here |
|
|
ASPHALT CUTTERS |
||
| < Previous |
 |
Next > |
|
hammer iron |
||||||||||
|
FORGED TOOLS BY DRIVE SHANK |
||||||||||
|
FORGED TOOLS BY TOOL TYPE |
||||||||||
|
FORGED TOOLS ASPHALT CUTTERS are used to cut and remove asphalt. ASPHALT CUTTERS are forged from iron for strength. ASPHALT CUTTERS can be factory sharpened to extend life. |
||||||||||
|
||||||||||
B & A Manufacturing Company provides complete Forged Tools and carbide tipped drill bit repair, tipping, and sharpening services. We not only repair our own forged tools and carbide tipped drill bits, but those made by other manufacturers as well at a fraction of the cost of new ones! So don't throw away those expensive carbide tipped drill bits, collect them up and send them to us and let us recondition them!For a complete list of carbide tipped drill bits we repair please click here.
We not only work on carbide tipped drill bits
but also that expensive hammer iron. |
||||||||||
|
B&A Manufacturing
Company
welcomes engineered drilling applications. Our fifty plus years of
experience qualifies us to design and manufacturer carbide tipped drill
bits and specialty products for almost any drilling application. We
have the capacity to manufacture carbide tipped drill bits that are
considered nonstandard by other manufacturers. We can and will design a carbide tipped drill bit or specialty tool that will do your job at a reasonable cost. If your job calls for a special drill bit, give us a call at (800) 327-8611 or email us at drills@bamanufacturing.com We can work from your drawings or design it for you. |
||||||||||
|
We are the
Largest Manufacturer of Custom Carbide Tipped Drill Bits |
|
If you don't see it,
just call us and ask! |